Please make sure the camera is in within reach of your gateway and Wifi-network.
Connect your mobile phone toa 2.4G network before setting up the camera.(5G is not supported by the camera)
lf you are using a dual band router, make sure your 2.4G Wifi is enabled and discoverable .
You can relocate the camera after you have finished the setup. Just unplug the power cable and relocate to desired
location and connect power to boot and connect the camera. The camera will automatically connect to
the WiFi after successful configuration.
1. Open …/More –> manage devices –>
2.The camera will be discovered by Wattle automatically when connected to your
network& authenticated with standard user and password which later can
be changed from device settings. You will now see your camera as
“NOT CONFIGURED” status.
That means camera is not yet placed in any room.
3. Click Configure
a. Assign a room to the camera
b. Settings for Camera usage can be “Record” or “Generic”
“Record” cameras will start recording in a case of an event
lf record usage is selected, select also
“USAGE OPTION” – meaning which event will trigger recording. There are 2 possible usage options: on motion or on motion when away alarm is armed. Press “OK”.
“Generic” cameras can be used for streaming and normal recording, but will not start automatically
recording in case of alarm event. Press “OK”.
5. Press “Apply” to save camera configuration
Your camera will now be added to room you assigned (e.g. “GARAGE”) and will have “AUTHENTICATED” status in the device list.
*If camera is already set up using cable, reset the camera to proceed with WiFi setup
1.Open …/More –> manage devices –> add manually -> camera
2. Specify WiFi name and password. (Case sensitive)
3. Generate QR code.
4. Press reset button on a camera for 5 seconds, until blue LED starts blinking.
5. Present mobile phone with QR code in front of camera. (Use max brightness)
Wait until camera read QR code. There will be 2 beeps when camera is connected to WiFi.
7. Return to …/More –> manage devices –>
8. The camera will appear automatically in the device list when connected to your network.
You will now see your camera as “NOT CONFIGURED” thaat means that camera is not
yet placed in any room.
9. Click Configure
a. Assign a room to the camera
b. Settings for Camera usage can be “Record” or “Generic”
“Record” cameras will start recording in a case of an event
lf record usage is selected, select also
“USAGE OPTION” – meaning which event will trigger recording. There are 2 possible usage options: on motion or on motion when away alarm is armed. Press “OK”.
“Generic” cameras can be used for streaming and normal recording, but will not start automatically
recording in case of alarm event. Press “OK”.
10. Press “Apply” to save camera configuration.
Your camera will now be added to room you assigned (e.g. “GARAGE”) and will have “AUTHENTICATED” status in the device list.
After completing the configuration of the camera you can open the room from the dashboard to see live stream and recordings from the camera. You will find the cameras under security tab in each room with cameras. You can now do on-demand recording and download recordings from the cloud storage to your phone.
Follow this procedure if you need to do a factory reset :
receive exclusive offers and the latest news on our products and services.
When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.