• Go to the room(s) where you want to schedule night temperature reduction.
• Set the action first (i.e. set temperature to for an example 18 degrees)
• Press Schedule
• Choose which days and what time the schedule to be active (this example Mon-Fri 11:40PM)

Now you have saved the night temperature reduction but to make it warm and cosy in the morning again you should also repeat the process and set your normal temperature (i.e. set temperature to for an example 22 degrees) and save it to another schedule..

• Go to settings -> Automation -> Schedules

Here you can see all schedules you created and inactivate the schedule if you do not want the schedule to run. You can also edit the schedule after created if some details need to be adjusted.

If you are a person which do not go to bed the same time every time and rather would like to manually trigger night temperature reduction you could save the settings/actions to a Scene instead. The scene will be on the dashboard for activation. This can also be connected to a button with our Quick rule “Apply a scene with a button” which you then can have next to the bed for easy activation.