Smart Water Leakage Sensor
Smart water leakage sensor. Separate design of body and sensor.
efficiently let you place the sensor in critical spots.
High precision and sensitivity. May be used for
basement. bathroom, kitchen, laundry room and other places
that may have water leakage or water overflow.
1. install water leakage sensor at easy leakage area.
2. Don’t install water leakage sensor at position of rainwater, lampblack, water vapor etc.
3. Don’t install water leakage sensor at water immersed position.
Remove the battery insulator from product to activate.
Click on the gear-symbol on your dashboard to add new device. Start device scan to search for new device.
After starting the search in the APP, press network button (pin hole) for 3 seconds to enter inclusion mode. LED will flash rapidly until device are detected by your gateway. you will see the new device appear in the search results on your app.
If any problems scanning device, please refer to Disconnect/Factory reset.
Remove the protecting film of the adhesive tape and mount the sensor to the required area.
insert water leakage body to bracket.
Press and hold the network button (pin hole) for 5 seconds to disconnect / reset the device. The LED will flash six times to indicate successfully disconnected / reset.
Please replace battery correctly, following the battery positive and negative electrode. Attention to environmental protection ond dispose used battery properly.
Operating Voltage: DC3V (2x AAA battery)
Static current: ≤5uA
Alarm current: ≤30mA
Networking: ZigBee 1.2 Home Automation
Operating temperature: -10°C ~+50°C
Relative humidity: Maximum 95%RH
Body dimensions: 76 x 36.6 x 16.5 mm
Sensor dimensions: 28.3 x 26.5 x 12,2 mm
receive exclusive offers and the latest news on our products and services.
When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.