Get started, place, scan, configure and reset
Expand the alarm system with a loud siren (95 dB). The siren has a built-in backup battery in case of power failure or that the device should be removed from the wall socket. You can have multiple sirens in your smart home. All sirens connected to Wattle are connected in series which means that alarm-sound will be coming from all sirens.
Step 1. Place the siren into a power outlet.
Step 2. Press and hold the button, release when it blinks once.
Step 1. Open the Wattle app and search for a new device. (Settings–> Manage devices)
Step 2. Choose configure when siren displays in the scan.
Step 1. Set a device name
Step 2. Add the device to a room.
Select the room you want from the list or add a new room.
Settings for: Siren
Usage Defaults to security.
Step 3. Choose Apply when satisfied with configuration
Step 1. Press and hold the button. Hold for approx. 10 seconds.
Step 2. Release the button when the LED flashes red once.
Step 3. The device is now ready to connect to a gateway.
Battery life about 17 hours.
Ni-MH AAA Battery x 4.
* Note: Actual battery life may vary with product settings, operating environment, and usage.
The siren is not detected during scanning – follow the reset routine and try to scan again after the device.
If the signal is weak or bad, change the location on the siren or gateway. Perhaps use a Zigbee signal amplifier between the siren and gateway.back to Wattle Devices
receive exclusive offers and the latest news on our products and services.
When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.