All user roles are sent alarm notifications (providing they are set up). After the alarm reason has been investigated it can be suppressed in the app pop up or by going into manage alarm on the dashboard and pressing suppress alarms page. To clear the alarm the sensor need to be dry.  When a sensor triggers due to water leak you will be notified with push-notifications, sms and/or email depending on your configuring of notifications (settings-> notifications)

Water leak alarms differ a bit from burglary-alarm, this alarm can not be turned off if reason for alarm remains, so if water triggered the alarm you have to dry the connectors on the water leak detector.

When entering the Wattle app you will be fronted with the alarms activated page and which sensors triggered the alarm.

• Blinking drop to the left= Flood alarm

Here you can suppress the alarm-page, see what sensors triggered the alarm and check statistics of sensor.

if you go back, you can later access alarm active page from this dashboard-widget where you see what kind of alarm got triggered.